Business Phone Service Providers
Business phone service has transformed dramatically over recent decades—so it’s critical to know your options if you’re thinking about switching providers or replacing your phone system.
Recent changes in carriers’ offerings have mainly been driven by the evolution of Voice over Internet Protocol (VoIP) technology. VoIP makes it possible to send phone calls over the Internet, as opposed to traditional phone lines.
VoIP service is technically complex, so you’ll need to understand the key elements of a solution before you begin evaluating providers. Additionally, there are reasons to explore other types of phone service besides VoIP even though most businesses are now migrating to VoIP service when they need a new system.
Phone Service Types: POTS, VoIP, Cellular and PRI
The following graphic breaks down the basic types of voice service available in North America:Voice Service Types
That said, the FCC is currently overseeing the sunset of the traditional copper telephone network. If you’re currently using POTS, you need to be aware that copper phone lines will be dead for good in just a few more years.
VoIP is a technology that transmits real-time voice information as data using an Internet connection.
VoIP differs from other digital voice services in that the voice information isn’t just digitized, but also transmitted using Internet Protocol (IP). This means you can use broadband Internet access for both voice and data. Other kinds of digital voice service businesses need both Internet and voice service.
VoIP can be used with various types of Internet access, including:
- Broadband cable
- DSL
- Fiber optic
- T1
Cellular service only supported voice calling at one point, but it now refers to a family of services that also enable wireless data connections to the Internet.
On a smartphone, a voice call can be routed via the cellular carrier, which will rack up per-minute rates. However, the call can also be sent over a long-term evolution (LTE) data connection, so you only pay for the data used by the call—no per-minute rates.
This is a variation on VoIP known as Voice over LTE, or VoLTE. (While LTE refers specifically to 4G networks, a 3G or wireless Internet connection can also be used.)
Finally, T1 connections support a whole family of digital voice services:
- Primary Rate Interface (PRI) service is a specialized type of digital voice service that’s been available since the 1980s. With PRI, a T1 trunk line is divided into 24 channels, 23 of which can be used for voice calls. The 24th channel is utilized for signalling information like caller ID. While PRI has been in use in enterprise contact centers for decades, the technology has limitations when it comes to scalability. In particular, because only 23 channels are available for voice calls, a business will need to buy a whole new trunk line with another 23 channels for calls in order to handle 24 calls at once. This means that you’re essentially paying for unused capacity. VoIP, on the other hand, is much more scalable and affordable in North America. (There are regional cases to be made for using PRI in other countries.)
- Channelized T1 is a T1 trunk divided into 24 channels for voice calls. With channelized T1, there’s no separate channel for signalling information as there is with PRI, which means the service can’t support essential capabilities, such as caller ID.
- Unchannelized T1 is just that: a trunk line that hasn’t been divided into channels. Unchannelized T1 is used for data service, whereas PRI and channelized T1 are used for voice service. An unchannelized T1 connection can support VoIP service.
Pros and Cons of Different Service Types
The table below summarizes the advantages and disadvantages of each service type:
Finding the Right Service Type and Provider for Your Phone System
There are two basic elements of a communications solution: the hardware- or software-based phone system (also known as a Private Branch eXchange or PBX system), and the phone service that allows you to make and receive calls.Contemporary phone systems can be based on hardware or software deployed at your company, on-premise, or they can be hosted in the cloud.
Some businesses don’t even have desk phones—just softphone applications installed on laptops that connect via the Internet to a phone system in the service provider’s data center.
VoIP-based systems are particularly flexible in this respect.
The table below shows the major phone system types and the voice services they work with. Definitions of each system can be found below the table:
| System Type | POTS | PRI | VoIP | Cellular |
| Traditional PBX | ✓ | ✓ | ||
| Cloud-based or on-premise IP PBX | ✓ | ✓ | ||
| Hybrid PBX | ✓ | ✓ | ✓ | ✓ |
| Virtual PBX | ✓ |
- A traditional PBX is a system designed either for analog voice service or PRI service (in addition to other types of digital voice service based on time-division multiplexing, which is the fundamental technology behind PRI service).
- An Internet Protocol PBX or IP PBX is a system designed specifically for VoIP service. An IP PBX can be deployed on your business’s premises or in the cloud.
- A hybrid PBX is a system that can handle both VoIP service and traditional analog and digital voice services.
- A virtual PBX is a stripped-down hosted phone system designed for very small businesses that primarily want to use employees’ personal cell phones for business communications. No hardware or software is deployed at the business’s premises. Instead, employees get special work phone numbers. When a call is made to one of these work numbers, the virtual PBX provider forwards it to the employee’s personal mobile device.
The Difference Between SIP Trunking Service and Business VoIP Phone Service
As we’ve explained, calls between offices are free with business VoIP service because they don’t have to travel over the traditional phone network (known as the Public Switched Telephone Network or PSTN). This is also why services such as Skype offer free voice and video calls, but only to other Skype users.In order to connect calls between VoIP numbers and numbers serviced by the PSTN in this country or internationally, you need a special service known as SIP trunking. SIP trunking is a complex network service, but it essentially acts as a bridge across which voice calls can travel between the Internet and the PSTN.
Confusingly, the term “VoIP service” can refer either to the delivery of phone system functions (call routing, voicemail, call recording etc.) over the Internet with a cloud-based PBX, or to SIP trunking service.
With an on-premise IP PBX, you’ll need a SIP trunking provider to connect calls, unless you’re planning to restrict communications to calls between offices.
Many cloud PBX vendors handle SIP trunking for their customers via their relationships with major carriers. This means that you only need to deal with one company for both your phone system and SIP trunking needs.
On the other hand, some businesses choose to go with separate companies: one for the phone system and one for SIP trunking. This setup makes sense if your SIP provider is offering you particularly good rates on calls, or if you’ve had good experiences with the providers’ uptime and quality of support.
You can connect SIP trunks from various providers to a phone system hosted in the cloud, just as you can with a phone system on your business’s premises.
Whether you have a cloud-based or on-premise IP PBX, you’ll need to make sure that your SIP trunking provider is compatible with your phone system (unless, of course, the same company is handling your hosted system and your SIP trunking).
The graphic below shows the different ways in which SIP trunking can be combined with VoIP systems:
Different SIP Trunking Setups with IP PBX Systems
https://www.softwareadvice.com/voip/business-phone-service-comparison/#buyers-guide
Komentar
Posting Komentar